Newest zeltiq coolsculpting machine/equipment/therapy

Cryolipolysis weight loss machine ( Cryolipolysis + Lipo cavitation +Bipolar RF+Multi-polar RF ) 4 heads . OEM / ODM CE Newest cryolipolysis slimming equipment/machine

What is Cooling slimming?

Cooling slimming is a breakthrough, non-invasive procedure that uses cooling technology to noticeably eliminate fat without surgery.It is a targeted cooling process that kills the fat cells underneath the skin, literally freezing them to the point of elimination. Only fat cells are frozen. Your healthy skin cells remain, well, healthy. No knives. No suction hoses. No needles. No scars. Once crystallized, the fat cells die and are naturally eliminated from your body.

 

Advantages of Cooling slimming?

Procedures that use laser, or even surgery to remove fat can actually destroy other tissue in the process by burning, shattering or extracting non-fat cells. This requires downtime for your body to heal. Totally uncool. Fortunately, Cooling slimming doesn’t burn, shatter or extract any cells.

 

Unlike a lot of other procedures, Cooling slimming takes very little time and is pretty simple to fit into your daily life. After your CoolSculpting treatment you can typically get right back to your busy day. No knives. No suction hoses. No needles. No scars. What’s more Each treatment lasts one hour – the same time you might spend at the gym. So you can easily fit your appointment into a lunch break.

 

 

BEFORE & AFTER GALLERY

 

 

 

 

Parameters:

Voltage	220v,50HZ; or 110V, 50HZ
Screen	8 –inch wide color touch screen
Power consumption	About 600W
Cooling device output temperature	-10 to 5°C
Cooling liquid	Pure water
Default woiking time	0-99min
Fuse size	F2AL250V
Atmosphcric pressure	1Kpa- 9000pa
Ultrasoun Cavitation	40k HZ
Bipolar RF	1 HZ
Monopolar RF	From 1 MHZ to 3 MHZ
Maximum vacuum rate	40 lt per minute

 

What happens during the treatment?

You and your clinican first select the area(s) to be treated. Your clinican will position the device on your body. The device will then draw the bulge up between two cooling panels. The sensation is a firm pull and pressure – enough of a pull to ensure the selected tissue will be cooled most efficiently. An hour or so later, depending on your needs, you’re done.

 

Notes:

1.In case of first use of cryoprobe ,the machine water tank must be filled with coolant

2.Add coolant to the machine on a regular basis(often supplement once a week)

3.First operation.The water pump inside is first stared ,coolant may not be able to reach the handle. Please try to anti-press start and stop button unti the coolant can reach handle to play a circulating cooling effect.(start and stop button interval of about 30 seconds). When use of cryoprobe ,the left and the right sides of the suction cup are severe fever and sustained high temperatures at about 50°C, indicating that the cooling system is not working properly and the coolant can not be transported to the handle.

4.The coolant in the water tank must be discharged during packing and transporting of the treatment .

 

Warranty

One year warranty and lifetime service are performed for the product manufactured by our company, but the following circumstance doesn’t belong to the scope of warranty.

1 .The damage is caused by accident or when this product is not installed and used as required by the operation instruction.

2. The damage is caused as the user personally changes the parts of this product.

3. The damage is caused by all artificial factors and force majeure.

Newest zeltiq coolsculpting machine/equipment/therapy